Extraction and filtration
Paint mist filters for spray stands, extraction walls and paint booths, and a small spray booth for trials and samples.
2 products in this area
Paint booth filters
Andreae paint booth filters (Aerem)
Folded cardboard overspray arrestors for spray stands, extraction walls and paint booths – inertial separation instead of fleece. Supplied by VISECO, manufactured by Andreae Filters (AEREM Industrie SA, Geneva).
3 to 5 times the holding capacity of fleece filters
Spray booth for trials and samples
Small spray booth
Illuminated spray booth with coarse and fine filter in a drawer system for quick filter changes. KUNDE: active product? Question 17
approx. 1250 × 1500 × 2150 mm, 400 V, on castors or as a floor-standing model
Applications
Extraction systems and painting systems
as pre-arrestor in extraction wall and booth.
Spray stand
rear wall and floor filter in the VISECO small spray booth. KUNDE: confirm that the spray stand on PDF p. 5 is the small spray booth
Extraction box
bench-top unit on castors with cardboard filter. KUNDE: is the extraction box a VISECO product? If so, separate page or paragraph
Trials and sample production
laboratory, application engineering, sample building.
In the system with …
Less overspray, fewer changes: with heated atomizing air from the Airtherm compressed air heater, "the load on the intake filter is reduced so that it needs to be changed less often".
Frequently asked questions
How often do I have to change the paint mist filter?
The change criterion is the pressure difference, not the calendar: the catalogue recommends changing at 128 Pa final pressure difference, possible up to 256 Pa. When new, the pressure difference is between 8 Pa (0.25 m/s) and 42 Pa (1 m/s) depending on the type. As a guide, DGUV Information 209-046 states a loading of up to 25 kg for cardboard filters – considerably more than for glass fibre fleece.
Which filter type suits which paint?
The catalogue gives comparative values for three paint types: with solvent-based paint, HC (13 kg/m²) and HP (16 kg/m²) lead in storage capacity, HE (97 %) and HP (97.2 %) in separation efficiency. With high solid and 2K polyester all values rise; HP reaches 29 kg/m² and 99.3 % there. Rule of thumb: a lot of material → HC, high separation efficiency → HE, both → HP, entry level → Starter or Original. Table in the technical data.
How high are separation efficiency and storage capacity?
According to the catalogue, separation efficiency up to 98.1 % (Original, Starter), 98.3 % (HC), 99 % (HH), 99.21 % (HE) and 99.3 % (HP); storage capacity up to 18–29 kg/m² depending on type and paint. Compared with fleece filters, VISECO states a filter capacity 3 to 5 times greater. KUNDE: website image caption states 99.6 % for HE — define the value
Is the Andreae filter suitable for water-based paint?
Yes, according to the manufacturer FAQ (andreaefilters.com) all papers are moisture-treated. KUNDE: confirm approval for the types supplied; temperature/humidity limits from the manufacturer if applicable
Send an inquiry – in writing, with your process data
You will receive a type recommendation or a quote from VISECO in Aichach, Germany. KUNDE: response time and contact person
Other product areas
Hot wax technology
Hot wax spray gun · Hot wax pressure tank system
Compressed air and material heating
Compressed air heater · Heated airless hose